How To Adjust Sights On Hi Point C9?
If you have a Hi Point C9 and want to adjust the sights, there are a few things you need to know. First, the front sight is adjustable for windage by loosening the set screw in the center of the sight and moving it left or right as needed. The rear sight is also adjustable for windage, but you’ll need a tool to loosen the set screws.
To adjust elevation, simply loosen the set screw in the front or rear sight and move it up or down as needed. Just be sure to re-tighten all set screws before shooting!
- Adjusting the sights on your Hi Point C9 firearm is a relatively simple process that can be done at home with just a few tools
- The first step is to remove the magazine and make sure the chamber is empty
- Next, you will need to unscrew the two screws that hold the rear sight in place
- Once the screws are removed, you can slide the rear sight back and forth to adjust for windage (left or right)
- To adjust for elevation (up or down), simply loosen the set screw located on top of the front sight post and turn it in the appropriate direction
- Once you have made your adjustments, be sure to retighten all screws before firing your weapon again
Setting the sights on a Hi-Point C9 9 mm
-How Do I Adjust the Sights on My Hi Point C9
If your Hi Point C9 is shooting high and to the right, you will need to adjust the front sight. To do this, first take out the magazine and make sure the chamber is empty. Next, unscrew the front sight adjustment screw (located on top of the barrel) counter-clockwise with a flat head screwdriver until the front sight moves down into position.
If your gun is still not accurate after making this adjustment, you may need to adjust the rear sight as well.
If you’re looking to adjust the sights on your Hi Point C9, there are a few things you’ll need to keep in mind. First, you’ll want to make sure that the gun is unloaded and that the safety is engaged. Next, take a look at the front sight – it should be positioned in the center of the rear sight’s notch.
If it’s not, gently tap it with a hammer until it is. Once you’ve done that, aim at your target and use the windage adjustment knob to move the rear sight left or right until the front sight is centered in the notch. Finally, use the elevation adjustment knob to move the rear sight up or down until your point of impact matches your point of aim.