Trigger On A Rem 700

How To Adjust The Trigger On A Rem 700?

Trigger On A Rem 700

There are many reasons why you might want to adjust the trigger on your Remington 700. Maybe you’re a competitive shooter and you want every advantage possible. Maybe you just don’t like the feel of the factory trigger.

Either way, it’s not difficult to do and only takes a few minutes.

  • Locate the trigger adjustment screw on the outside of the trigger guard, just behind the trigger
  • Using a small screwdriver, turn the adjustment screw clockwise to increase thetrigger pull weight, or counterclockwise to decrease it
  • Test the trigger pull weight by dry-firing the rifle several times
  • Adjust as needed until you have achieved the desired result

Remington 700 Trigger Tuning

Can You Adjust Trigger Pull?

Most guns can have their trigger pull adjusted. This is typically done by a gunsmith, but some people are able to do it themselves. The amount that the trigger pull can be adjusted varies from gun to gun.

Some guns have very light triggers that can be easily adjusted, while others have heavier triggers that are much more difficult to adjust.

Can You Adjust Trigger Tension?

Yes, you can adjust trigger tension on most handguns. There are two main ways to do this: by adjusting the trigger spring tension, or by installing a lighter trigger return spring. Trigger spring tension can be adjusted by using a smaller or larger diameter spring, or by changing the length of the springs.

The size and length of the springs will affect how much force is required to pull the trigger and how much resistance there is when the trigger is released. Installing a lighter trigger return spring will reduce the amount of force needed to pull the trigger, but will also make it easier for the gun to fire if it’s dropped or jarred.

Which Remington 700 Triggers are Recalled?

In April of 2014, Remington announced a recall of certain Model 700 and Model Seven rifles. The recall was issued due to a potential safety issue with the trigger mechanism. Affected rifles were manufactured between May 1, 2006 and April 9, 2014.

The recalled rifles have a X-Mark Pro (XMP) trigger that could potentially malfunction. A affected trigger could result in the gun firing unexpectedly when the safety is turned off, or when the bolt is closed after loading a round into the chamber. This could obviously pose a serious safety hazard to the user and those around them.

If you own one of the affected rifles, Remington recommends that you stop using it immediately and contact them to arrange for a free repair. The repair consists of replacing the existing trigger with a new one that does not have the same potential issue. Obviously this is a fairly major repair, so if you are not comfortable doing it yourself then you can take it to a qualified gunsmith or return it to Remington for repair.

So far there have been no reports of any injuries or accidents related to this issue, but it is still important to get your rifle fixed as soon as possible just to be safe. For more information on this recall, including how to identify an affected rifle and what steps to take next, please visit Remington’s website:

Can You Adjust Timney Trigger?

If you have a Timney trigger in your rifle, you might be wondering if you can adjust it. The answer is yes, you can definitely adjust a Timney trigger. In fact, adjusting a Timney trigger is relatively simple and only takes a few minutes.

There are two adjustment screws on the Timney trigger – one for sear engagement and one for overtravel. To adjust sear engagement, simply turn the screw clockwise to increase engagement or counter-clockwise to decrease engagement. For overtravel, turn the screw clockwise to increase overtravel or counter-clockwise to decrease overtravel.

It’s important to note that you should only make small adjustments at a time and then test fire your rifle before making any further adjustments. This will help ensure that you don’t accidentally make the trigger too light or too heavy. Overall, adjusting a Timney trigger is easy and only takes a few minutes.

So if you’re not happy with the way your rifle is currently shooting, consider making some adjustments to your Timney trigger.

How To Adjust The Trigger On A Rem 700?


Remington 700 Ltr Trigger Adjustment

If you’re a shooter, chances are you’re familiar with the Remington 700. It’s one of the most popular rifles on the market and for good reason. It’s accurate, reliable, and has a wide variety of aftermarket parts and accessories available for it.

One area where the 700 often needs some attention is the trigger. The factory trigger can be heavy and gritty, making it difficult to shoot accurately. Luckily, there are a few things you can do to improve it.

The first thing you’ll want to do is remove any burrs or roughness from the sear surfaces. You can do this with a fine file or stone. Next, if your trigger has an adjustment screw, take a look at how it’s adjusted.

If it’s too far out, it will cause light strikes on the primer and misfires. Too far in and the trigger will be very hard to pull. Adjustment screws should be backed out until they just barely touch the sear surface before being snugged down tight.

Once that’s done, give the rifle a good cleaning and lube job paying special attention to the trigger assembly components. A little bit of quality gun oil or grease on these parts will help keep them smooth and prevent wear over time. With those basics taken care of, your Remington 700 trigger should be much improved and ready for more precise shooting!


If you’re looking to adjust the trigger on your Remington 700, there are a few things you’ll need to know. First, you’ll need to remove the stock. Next, locate the set screw that controls trigger pull weight.

Using an Allen wrench, turn the set screw clockwise to decrease trigger pull weight, or counter-clockwise to increase it. Finally, re-assemble the rifle and test the trigger pull. With a little patience and a few turns of the set screw, you can easily adjust the trigger on your Remington 700.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *