How To Aim Mosin Nagant Iron Sights?

The Mosin Nagant is a Soviet bolt-action rifle that was used by the Russian military from 1891 to 1965. The rifle is named after its designer, Captain Sergei Mosin, and its factory director, Emmanuel Nagant. The Mosin Nagant has a unique feature in its iron sights: the front sight is offset to the left of the centerline of the barrel, while the rear sight is offset to the right.

This gives the illusion that the sights are not aligned when they are actually perfectly aligned. To aim using the iron sights, simply line up the front and rear sights with each other and with your target.

  • Look through the rear sight aperture and align the front sight with the target
  • Adjust the rear sight until the point of aim is in line with the point of impact
  • Use the windage knob to make small adjustments to account for windage, or elevation knob to adjust for elevation
  • Fire a shot and observe where it hits in relation to your point of aim

Using and understanding Mosin Nagant iron sights.

How Does the Mosin Nagant Sight Work?

The Mosin Nagant is a popular bolt-action rifle that was used by the Russian military from 1891-1965. It is known for its ruggedness and reliability, and was also used by Soviet forces during World War II. The Mosin Nagant has a unique sight system that allows for accurate shooting at long range.

The front sight of the Mosin Nagant is a fixed blade that is mounted on the barrel. The rear sight is a leaf sight that is adjustable for windage and elevation. The leaf sight has a notch in it that aligns with the front sight blade when the rifle is properly aimed.

This gives the shooter an accurate point of aim at long range. To adjust the rear sight, first loosen the windage screw so that it can be moved left or right. Then, using your thumb and forefinger, slide the entire rear sight assembly to the desired position.

Once you have it where you want it, tighten down the windage screw to secure it in place. Next, adjusting for elevation works similarly to adjusting for windage; however, instead of loosening/tightening a screw, you will use a knob located on top of the rear sight assembly. Turning this knob clockwise will raise the point of impact, while turning it counterclockwise will lower it.

Again, once you have made your adjustment, be sure to tightened down any screws or knobs so that your setting does not move unintentionally. With a little practice, you should be able to get proficient with using the Mosin Nagant’s sights and hitting targets at long range!

How Does the Mosin Nagant Rear Sight Work?

The Mosin Nagant rear sight is a simple, yet effective design. The sight consists of a leaf spring that is mounted on the barrel. When the rifle is fired, the recoil from the shot forces the leaf spring to move backwards, which in turn moves the rear sight blade up or down.

This allows the shooter to make adjustments to their point of aim without having to take their eye off of their target. The main advantage of this design is its simplicity. There are no moving parts inside of the sight itself, which means that there is less chance for something to break or malfunction.

Additionally, because the sight is mounted on the barrel, it is less likely to be damaged if dropped or knocked around. One potential downside of this design is that it can be difficult to adjust for windage (side-to-side movement). However, most models of the Mosin Nagant come with an adjustable front sight post that can be used to compensate for any wind drift.

What are Mosin Nagants Sighted In?

The Mosin Nagant is a bolt-action rifle that was used by the Russian military from 1891 to 1965. It was also used by Soviet Union forces in World War II, the Korean War and other conflicts. The Mosin Nagant has a five-round internal magazine and can be reloaded with stripper clips.

It is chambered for the 7.62x54mmR cartridge, which is also known as the “7.62x54mm Rimmed.” The Mosin Nagant’s sights are adjustable for windage and elevation. The front sight is a blade that is screwed into the barrel.

The rear sight is an aperture that is drift-adjustable for windage and has elevation settings from 100 to 1,600 meters (110 to 1,750 yards). The rifle can also be fitted with a bayonet for close-quarters combat.

What is the Proper Placement of the Back Up Iron Sight?

Assuming you are referring to the AR-15 platform, the general rule of thumb is that the back up iron sight (BUIS) should be mounted as close to the optical sight as possible. This allows for quicker target acquisition and a more seamless transition between sights if the primary optic fails. There are also some who advocate for mounting the BUIS slightly forward of the optic to provide a better cheek weld on the stock.

Ultimately, it comes down to personal preference and what works best for you and your shooting style.

How To Aim Mosin Nagant Iron Sights?


Mosin Nagant Iron Sights Phantom Forces

The Mosin Nagant is a Soviet-era bolt-action rifle that was first introduced in 1891. It has been used by various militaries over the years, including the Imperial Russian Army and the Soviet Red Army. The rifle is still in use today by many countries, including Russia, Ukraine, and Belarus.

The Mosin Nagant has a unique design that allows for its iron sights to be “folded down” when not in use. This feature was designed to help reduce the chance of damage to the sights during transport or combat. The iron sights on the Mosin Nagant are fairly simple, consisting of a front sight post and a rear leaf sight.

The front sight post is adjustable for windage (left/right) and elevation (up/down). The rear leaf sight is also adjustable for windage and elevation, but only has two settings: “battle” and “sniper”. To adjust the sights, you simply loosen or tighten the screws on either side of the sight base.

The battle setting is used for short-range engagements (100-300 meters), while the sniper setting is used for long-range shots (300+ meters). There are also several aftermarket sights available for purchase that can be installed on the Mosin Nagant. These include scopes, red dot sights, and even night vision optics.

Whichever sighting system you choose to use, practice with it beforehand so that you are familiar with its performance under different conditions.


If you’re a fan of the Mosin Nagant rifle, you probably already know that it’s a great weapon. But did you know that the iron sights on the Mosin Nagant are actually very easy to use? In this blog post, we’ll show you how to aim your Mosin Nagant using the iron sights.

First, take a look at the front sight. You’ll notice that there is a small notch in the center of the sight. This is called the “sight picture.”

Line up the front sight so that it is level with this notch. Then, take a look at the rear sight. You’ll see that there are two notches in the rear sight – one on each side of the front sight.

Line up these two notches so that they form a perfect V shape with the front sight notch. This V shape is called your “point of aim.” Now that you have your point of aim lined up, it’s time to focus on your target.

Choose something small and far away to focus on, like a leaf or branch on a tree. Don’t focus on anything too close to you – this will make it difficult to hit your target accurately. Once you have your target in focus, slowly squeeze the trigger until your shot goes off.

Remember to keep breathing steadily as you shoot – if you hold your breath while shooting, your shots will be less accurate. With practice, using iron sights can be second nature – and it’s a great way to improve your accuracy with any rifle!

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *