How To Change Cylinders On A Ruger Single Six?
If you’re a Ruger Single Six owner, chances are good that you know how to change cylinders. But for those who don’t, here’s a quick rundown on the process. First, make sure the gun is unloaded.
Next, open the loading gate and push the cylinder release button located just above the trigger guard. The cylinder will now swing out to the left, making it easy to remove any cartridges that may be in it. To replace the cylinder, simply line it up with the frame and swing it back into place until it locks into position.
That’s all there is to it!
- Unload the gun completely and make sure it is pointing in a safe direction
- Remove the grips by unscrewing the grip screw on the backstrap of the grip frame
- Use a wrench or pliers to remove the cylinder pin, which is located just above the trigger guard on the right side of the frame
- Lift out the old cylinder and replace it with a new one, making sure that all six chambers are aligned correctly with the barrel
- Screw in the cylinder pin until it is snug, but do not overtighten it
- Replace the grips and screw them in place securely
Ruger® Single Action Revolver Cylinder Removal Tech Tip
How Do I Change the Cylinder on My Ruger Single Six
Assuming you would like a step by step process on how to change the cylinder on your Ruger Single Six: 1. Make sure the gun is unloaded. Remove any ammunition from both the cylinder and revolver.
Visually inspect the cylinder to ensure it is clear of any bullets or debris. 2. Open the loading gate located on the right side of the frame above the grip. This will release pressure on the cylinder latch and allow you to open it.
3. Pull back on the hammer until it locks into place in order to avoid damaging it when removing or replacing the cylinder. 4. Push down on the cylinder latch, located under the loading gate, and swing out the cylinder away from the frame of the revolver. 5. To replace The cylinder, line up the notches in the cylinder with the pegs in the frame and push the cylinder back Into place until It locks Into position with a click sound.
.
Credit: oldarmsofidaho.com
Ruger Single Six 22 Mag Replacement Cylinder
Ruger Single Six 22 Mag Replacement Cylinder:
If you own a Ruger Single Six and want to be able to shoot 22 WMR cartridges, you’ll need to purchase a replacement cylinder. The good news is that Ruger makes it easy to do with their “drop-in” replacement cylinders.
Simply remove the old one and replace it with the new one – no gunsmithing required.
The new cylinder will give your Single Six the ability to fire both 22 LR and 22 WMR cartridges (the latter from the longer of the two included cylinders). This gives you plenty of versatility when it comes to shooting, whether you’re plinking cans at the range or hunting small game.
The Ruger Single Six 22 Mag Replacement Cylinder is an affordable way to add some extra firepower to your favorite revolver. Pick one up today and enjoy the benefits of owning a true multi-caliber handgun.
Ruger Wrangler Assembly
The Ruger Wrangler is a single-action, six-shot revolver that was introduced in 2019. It is chambered for the .22 Long Rifle cartridge and is produced by Sturm, Ruger & Company. The Wrangler features a fixed cylinder with a capacity of six rounds.
The hammer cannot be cocked unless the cylinder is fully open, which allows for safe carrying while loaded. The trigger pull is reported to be between four and five pounds. The revolver has an overall length of 11 inches (28 cm) and a barrel length of 4.62 inches (11.7 cm).
It weighs 26 ounces (740 g). The frame is constructed of aluminum alloy, and the cylinders are made of stainless steel. The grips are checkered black synthetic rubber.
The Wrangler is available in two finishes: blued or brushed stainless steel. Assembling the Ruger Wrangler revolvers requires no special tools beyond those needed to disassemble it for cleaning purposes. Simply ensure that the cylinder pin (1) is removed, then unscrew the grip frame screw (2) using a Phillips head screwdriver until it stops turning.
Conclusion
If you own a Ruger Single Six and need to change the cylinders, here are some easy instructions. First, make sure the gun is unloaded. Next, open the loading gate and remove any spent cartridges.
Then, push the cylinder release latch forward and rotate the cylinder until it lines up with the opening in the frame. To remove the old cylinder, simply pull it out. To install the new one, line it up with the opening and push it into place.
Finally, close the loading gate and you’re done!
