How To Clean Dirty Brass Ammo?

Dirty brass ammo can be frustrating to clean, but it is important to clean your ammo in order to keep your gun in good working condition. There are a few different ways that you can clean your brass ammo, and the best method will depend on how dirty the ammo is. If the brass is only mildly dirty, you can simply wipe it down with a cloth or brush.

For more stubborn dirt, you may need to soak the brass in a cleaning solution or use a brass brush.

  • Begin by separating the brass ammo from any other type of ammunition
  • This will make the process much easier and less confusing
  • Next, you will want to gather all of the dirty brass ammo and place it in a bucket or container that can hold water
  • Once everything is in the container, add enough hot water to cover all of the brass ammo
  • Now, you will need to add a cleaning solution to the water
  • There are many different options available, but one popular choice is Simple Green All-Purpose Cleaner Concentrate
  • Allow the brass ammo to soak in the solution for at least 30 minutes (longer if it is particularly dirty)
  • After soaking, use a brush to scrub away any remaining dirt or grime on the surface of the brass ammo
  • Finally, rinse off all of the brass ammo with clean water and allow it to dry completely before using it again

How To Clean Dirty ***LIVE*** Ammo (EASY)

How Do You Clean Dirty Brass?

If you have dirty brass, there are a few ways to clean it. You can use a vinegar and salt solution, lemon juice, or even ketchup! Just mix together equal parts of your chosen cleaner and apply it to the brass.

Let it sit for a few minutes before wiping it off with a soft cloth. If your brass is really dirty, you may need to repeat this process a few times.

Can You Clean Dirty Ammo?

If your ammunition is covered in dirt, grime, or other debris, you may be tempted to clean it off before firing. However, doing so can actually damage the ammo and make it less reliable. It’s best to only clean your ammo if it’s absolutely necessary.

If you do need to clean your ammo, the best way to do so is with a soft cloth or brush. Avoid using any harsh chemicals or solvents, as these can damage the bullet and primer. Once you’ve cleaned off the dirt and grime, make sure to dry the ammo completely before storing it or firing it.

How Do You Remove Buildup from Brass?

If you’re looking to remove buildup from brass, there are a few different methods you can use. One popular method is to use white vinegar. Simply soak a cloth in vinegar and then rub it onto the brass.

After a few minutes, rinse the area with water. You can also try using lemon juice or salt water. If you have stubborn buildup, you may need to scrub the area with a brush or abrasive pad.

Once you’ve removed the buildup, be sure to polish the brass with a soft cloth to restore its shine.

What is the Best Homemade Brass Cleaner?

If you’re looking for a natural, homemade brass cleaner, there are a few things you can use. One popular option is vinegar. Simply mix together equal parts vinegar and water in a bowl or spray bottle, then apply it to your brass piece.

Let it sit for several minutes before wiping it clean with a soft cloth. You can also add some salt to the mixture if you’d like. Another option is using lemon juice and salt.

Mix together 1/4 cup lemon juice and 1 tablespoon salt, then apply it to your brass item with a soft cloth. Rub in circles until the tarnish comes off, then rinse clean with water and dry with a soft towel. If you have sensitive skin, be sure to wear gloves while doing this.

For tougher jobs, you can make a paste out of baking soda and water. Just mix together 1/2 cup baking soda and 2 tablespoons water until it forms a thick paste. Apply it to the brass item with a soft cloth, let it sit for 15 minutes or so, then rub in circles until the tarnish comes off.

How To Clean Dirty Brass Ammo?


Cleaning Brass Cases With Vinegar

Whether you’re a casual shooter or a serious reloader, chances are you’ve got a brass case or two (or a hundred) lying around. Over time, brass can start to look dull and discolored. But don’t despair – there’s an easy way to clean them up and make them look like new again!

All you need is some vinegar and a little elbow grease. First, soak the brass in vinegar for about 30 minutes. Then, use a soft brush to remove any dirt or debris.

Rinse the cases well with water and let them air dry. That’s it! Your brass cases will be good as new – ready for reloading or display.

Homemade Brass Cleaning Solution

Assuming you would like a blog post discussing a homemade brass cleaning solution: When it comes to keeping your home clean, brass is one of those materials that can be difficult to keep shining. You can buy commercial brass cleaners, but they can be expensive and full of chemicals.

If you’re looking for a more natural way to clean your brass, try this homemade solution. Ingredients: -1/2 cup lemon juice

-1/4 cup baking soda -1 tablespoon salt -1 quart hot water

Instructions: 1. Combine all ingredients in a large bowl or bucket. 2. Stir until the salt and baking soda are dissolved.

3. Submerge your brass pieces in the solution and let them soak for at least 30 minutes (longer if they’re very dirty). 4. Rinse with clean water and dry with a soft cloth.

Cleaning Brass Cases With Soap And Water

If you’re a reloader, you know that brass cases need to be clean before they can be reloaded. One way to clean them is with soap and water. Here’s how to do it:

1. Start by wetting the brass cases with warm water. 2. Then add a small amount of dish soap to the water and stir it around so that the soap is evenly distributed. 3. Next, use a soft brush to scrub the brass cases, being sure to get into all the nooks and crannies.

Pay special attention to any areas that look especially dirty or tarnished. 4. Once you’ve given them a good scrubbing, rinse the brass cases off with warm water until all of the soap is gone. You may want to let them soak in the sink for a few minutes to make sure all of the soap is removed.


If you’re like most people, you probably have a stash of brass ammo that’s been gathering dust for years. Here’s how to clean it up and make it look like new again! You’ll need:

-A bucket or container big enough to fit all of your brass ammo in -Water -Vinegar or lemon juice

-Baking soda -A toothbrush or other small brush -A towel or rag

Instructions: 1. Fill your bucket or container with water and vinegar or lemon juice, in a ratio of about 1:1. So, if you have a gallon of water, add a gallon of vinegar.

If you’re using lemon juice, use twice as much as you would vinegar. 2. Add your brass ammo to the mixture and let it soak for at least an hour, stirring occasionally. 3. After the soaking time is up, remove your brass from the mixture and rinse it thoroughly with clean water.

4. Sprinkle baking soda on any areas that are still dirty or tarnished. 5. Use your toothbrush or other small brush to scrub the baking soda into the dirt and stains until they disappear. Rinse the area with clean water when done.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *