How To Mount Atlas Bipod On Remington 700?

The Remington 700 is one of the most popular rifles on the market and for good reason. It is accurate, reliable, and versatile. One of the best ways to make your Remington 700 even more versatile is to add a bipod.

In this article we will show you how to mount an Atlas Bipod on a Remington 700. There are a few different ways that you can mount an Atlas Bipod on a Remington 700. The first way is to use the factory sling swivel studs.

This is the easiest way to do it and does not require any modification to your rifle. Simply remove the factory sling swivel stud from the bottom front of your stock and replace it with the Atlas Bipod mounting plate. Then just attach your bipod to the plate using the included hardware.

Another way to mount an Atlas Bipod on a Remington 700 is by drilling and tapping two holes in the bottom front of your stock. This method requires a little more work but provides a much more secure connection between your bipod and rifle. To do this, first remove the factory sling swivel stud from the bottom front of your stock.

Next, using a drill bit slightly smaller than the diameter of your tapped holes, drill two holes in the stock where you want to mount your bipod plate.

  • Start by attaching the swivel stud to the front end of your Remington 700’s stock
  • Then, take the Atlas Bipod and extend it to its full length
  • Now, fit the bipod onto the swivel stud, making sure that the teeth on the clamp are properly engaged with those on the stud
  • Finally, tighten down the clamping knob on the side of the bipod until it is snug against the stock

Rem 700 .308 new set up (Atlas Bipod use)

Can You Put a Bipod on a Remington 700?

A bipod is a device that is typically used to stabilize a rifle. It consists of two legs that can be adjusted in length and usually have some type of mechanism for attaching to the rifle. There are many different types and styles of bipods on the market, but they all serve the same purpose.

So, Can you put a bipod on a Remington 700? The answer is yes, you can put a bipod on a Remington 700. In fact, there are many different types of bipods that are specifically designed to fit onto the Remington 700.

These bipods will attach to the bottom front sling swivel stud or the rear sight dovetail (depending on which model you have). There are also universal bipods that come with adapters that will allow them to fit onto almost any type of rifle. So, if you don’t want to purchase a specific bipod for your Remington 700, then you could go with one of these universal models.

Just make sure that you get an adapter that is compatible with your particular model of rifle.

What is Bipod Cant?

Bipod cant is a type of shooting technique where the rifle is tilted slightly to one side in order to improve stability and accuracy. This technique is often used when shooting from prone or other unsupported positions. There are a few different ways to achieve bipod cant, but the most common is to simply place the butt of the rifle on the ground at an angle.

This will tilt the barrel up slightly, making it easier to align with your target. Another option is to use a dedicated bipod that can be adjusted for cant. The main benefit of bipod cant is that it increases stability by widening the base of support for the rifle.

This can be especially helpful in windy conditions or when trying to make long-range shots. It also helps reduce felt recoil, making follow-up shots more accurate. If you’re considering using bipod cant, there are a few things to keep in mind.

First, make sure you have a good understanding of your target and what kind of shot you need to make. Second, take some time to experiment with different angles and find what works best for you and your rifle. And finally, always practice safe gun handling procedures!

How To Mount Atlas Bipod On Remington 700?



In this post, the author details how to properly mount an Atlas Bipod on a Remington 700. First, the user needs to remove the factory magazine floor plate and then remove the stock. Next, the user will need to install the bipod stud onto the front action screw.

After that, they can place their bipod onto the stud and hand-tighten it before going out and enjoying some shooting.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *